It eliminates the calcareous residues, cement or plastering traces, yard-dirty. It’s carried out with SERVICE ACIDO thinned in water (one part of acid and one part of water). Apply the product on the flooring and rub it with abrasive stopper or with monobrush, having a disk in synthetic fibre with a mean hardness. Remove the washing water trough a liquids-aspirator. Rinse with clean water. Reply the application if necessary. Let it dry until the surface get once again its original color.
T.N.: Before the washing-beginning you have to respect the drying times of the products used for the floor-stuccing. Carry out very carefully the final rinsing, to avoid that on the material remains dust or others solid residues, with the danger of their fixing during the following treatments and, therefore, of chromatic changes and of tone-dishomogeneity.

Gives to the material depth water repellency and machine resistance, both water and oil machines. It’s carried out both inside and outside by applying PREVENT 2 MARMO E PIETRA uniformly on all the surface with a rag or with a fleece for wax spreading or with a brush, avoiding to let lay on the surface too much material. Let it dry completely before to apply an eventual finishing. The approximate consumption is 1 Liter for about 6-8 square meters.
T.N.: It’s important to remove immediately eventual product-excesses during the applying,
as, once dry, they could be more difficult to remove and they could generate
chromatic changes and tone-dishomogeneity.

It eases the surface cleaning and increases the strength of the treatment against the wear. It’s carried out only indoor or by covered outdoor at least 12 hours after the protection treatment, by applying uniformly and avoiding to let lay too much material two coats of WOPLUS NO-LUX, with a rag or with a fleece for wax spreading; let it dry completely between the two coats. Don’t stamp on the surface during its drying. The surface is usable after 2-4 hours. The surface is usable at best within 24-48 hours. The approximate consumption is 1 Liter for about 12-15 square meters.

The cleaning is done often with rag or mop saturated with solution by 2-3% of LINDO+SANIGEN. Frequency: according to the need. For the periodic manteinance, wash energically with solution by 10% of LINDO+SANIGEN, then apply a well dissolved coat of pure WOPLUS NO-LUX, following the same operative mode mentioned by point 3, to renew the surface protection. Frequency: one time every 2-3 months.
T.N.: to avoid the absorption of stains and dirty coming from the yard-works, we advice to shield fitty the surface both after the laying and after the treatment. Don’t cover with plastic if the floor is not perfectly dry. Don’t use for the cleaning products like chlorine water, ammonia water, alcool.

It eliminates the calcareous residues, cement or plastering traces, yard-dirty. The material pretreatment eases the remove of this kind of dirty. The washing is carried out with SERVICE ACIDO thinned in water (one part of acid and three parts of water). Apply the product on the flooring and rub it with abrasive stopper or with monobrush, having a disk in synthetic fibre with a mean hardness. Remove the washing water trough a liquids-aspirator. Rinse with clean water. Reply the application if necessary. Let it dry until the surface get once again its original color.
T.N.: Before the washing-beginning you have to respect the drying times of the products used for the floor-stuccing. Carry out very carefully the final rinsing, to avoid that on the material remains dust or others solid residues, with the danger of their fixing during the following treatments and, therefore, of chromatic changes and of tone-dishomogeneity.

Usually the material pretreated in the plant doesn’t need any further application of protective materials. It could be necessary to renew the protection if the acid washing (point 1 ) is carried out in a powerful way. In this case, apply one light and well dissolved coat of PREVENT 2 MARMO E PIETRA uniformly on all the surface with a rag or with a fleece for wax spreading or with a brush, avoiding to let lay on the surface too much material. Let it dry completely before to apply an eventual finishing.

It eases the surface cleaning and increases the strength of the treatment against the wear. It’s carried out only indoor or by covered outdoor, soon afterwards the washing, with a dry floor.Apply two coats of WOPLUS NO-LUX, with a rag or with a fleece for wax spreading, uniformly and avoiding to let lay on the surface too much material; let it dry completely between the two coats. Don’t stamp on the surface during its drying. The surface is usable after 2-4 hours. The surface is usable at best within 24-48 hours. The approximate consumption is 1 Liter for about 12-15 square meters.

The cleaning is done often with rag or mop saturated with solution by 2-3% of LINDO+SANIGEN. Frequency: according to the need. For the periodic manteinance, wash energically with solution by 10% of LINDO+SANIGEN, then apply a well dissolved coat of pure WOPLUS NO-LUX, following the same operative mode mentioned by point 3, to renew the surface protection. Frequency: one time every 2-3 months.
T.N.: to avoid the absorption of stains and dirty coming from the yard-works, we advice to shield fitty the surface both after the laying and after the treatment. Don’t cover with plastic if the floor is not perfectly dry. Don’t use for the cleaning products like chlorine water, ammonia water, alcool.